1988 Pontiac Fiero tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x100 on every 1988 trim.

Tires for the 1988 Pontiac Fiero

Sizes most trims come with first. Open your trim below for its exact size.

  1. 205/60R15 Best-rated standard on 1 trim · optional on 2
  2. 185/75R14 Best-rated standard on 1 trim
  3. 205/55R16 front + 225/50R16 rear Best-rated standard on 1 trim

Also listed: 195/70R14 205/55R16 215/60R14 215/45R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1988
3
Generation
P-body

3 trims sold in 1988

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Pontiac Fiero P-body

1984–1988 3 trims
Fiero 2.5 97 hp · I4 185/75SR14 4 fitments
Generation
P-body · 1984–1988
Power
97 hp
Engine
I4, Petrol
Center bore
57.1 mm
Bolt pattern
5x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
185/75SR14Rim 14x5.5 ET42 5x10029 psi
195/70SR14Rim 14x6 ET35 5x10029 psi
215/60HR14Rim 14x6.5 ET35 5x10032 psi
205/60VR15Rim 15x6.5 ET35 5x10032 psi
Fiero 2.8 137 hp · V6 205/55VR16 / 225/50VR16 4 fitments
Generation
P-body · 1984–1988
Power
137 hp
Engine
V6, Petrol
Center bore
57.1 mm
Bolt pattern
5x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
Front205/55VR16Rim 16x7 ET30 5x10029 psi
Rear225/50VR16Rim 16x7.5 ET30 5x10029 psi
195/70SR14Rim 14x6 ET35 5x10029 psi
205/60VR15Rim 15x7 ET30 5x10032 psi
205/55VR16Rim 16x7 ET30 5x10032 psi
Fiero 2.8 GT 139 hp · V6 205/60VR15 3 fitments
Generation
P-body · 1984–1988
Power
139 hp
Engine
V6, Petrol
Center bore
57.1 mm
Bolt pattern
5x100
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/60VR15Rim 15x7 ET30 5x10032 psi
205/55VR16Rim 16x7.5 ET35 5x10032 psi
215/45VR17Rim 17x8 ET30 5x10033 psi
What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Staggered
A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1988
3
Generation
P-body
Other years
All years (1984–1988)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator