1986 Porsche 924 tire and wheel sizes, bolt pattern and tire pressure

Bolt patterns 4x108 (Europe) or 5x130 (USA), depending on the market version.

Tires for the 1986 Porsche 924

Sizes most trims come with first. Open your trim below for its exact size.

TireWheelGuide may earn a commission from purchases made through these links.

Sold in 2 market versions with different tire sizes and bolt patterns. Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

1976–1988 2 trims

1 trim

924 2.0 123 hp · 2.0 L 047.8/9 (EA831) I4 Petrol 2.0 L 047.8/9 (EA831) I4 185/70HR14 3 fitments

Check price on Amazon · 185/70R14 Wheels 14x6 ET20 · 4x108 · 57.1 mm on Amazon

Fit	Tire size	Rim size and bolt pattern	Pressure, psi
OE	185/70HR14	Rim 14x6 ET20 ~~4x108~~	29 psi
Alt	185/65HR15	Rim 15x6 ET20 ~~4x108~~	29 psi
Alt	205/60HR15	Rim 15x6 ET20 ~~4x108~~	29 psi

1 trim

924 2.5 S 148 hp · 2.5 L M44.07/08 I4 Petrol 2.5 L M44.07/08 I4 195/65VR15 4 fitments

Check price on Amazon · 195/65R15 Wheels 15x6 ET52 · 5x130 · 71.6 mm on Amazon

Fit	Tire size	Rim size and bolt pattern	Pressure, psi
OE	195/65VR15	Rim 15x6 ET52 ~~5x130~~	29 F / 36 R psi
Alt	195/65VR15	Rim 15x7 ET52 ~~5x130~~	29 F / 36 R psi
Alt	205/55VR16	Rim 16x6 ET52 ~~5x130~~	29 F / 36 R psi
Alt	Front205/55VR16	Rim 16x7 ET52 ~~5x130~~	29 psi
	Rear225/50VR16	Rim 16x8 ET52 ~~5x130~~	36 psi

What these columns mean

OE fitment: The package fitted at the factory for that trim.
Alternative: A size the car accepts without modification — plus-sizing, winter setups or optional wheels.
Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.