2010 Subaru Impreza Anesis tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x100 on every 2010 trim.

Tires for the 2010 Subaru Impreza Anesis

Sizes most trims come with first. Open your trim below for its exact size.

  1. 205/55R16 Best-rated standard on 2 trims · optional on 2
  2. 195/65R15 Best-rated standard on 2 trims
  3. 205/50R17 Best-rated optional on 4 trims

Also listed: 215/45R17 225/40R18

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2010
4
Generation
G3

4 trims sold in 2010

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Subaru Impreza Anesis G3

2007–2011 4 trims
Impreza Anesis 1.5i (DBA-GE2) +1 variant 109 hp · H4 195/65R15 91S 4 fitments

Same tires and wheels on: 1.5i (DBA-GE3)

Generation
G3 · 2007–2011
Power
109 hp
Engine
H4, Petrol
Center bore
56.1 mm
Bolt pattern
5x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
195/65R15 91SRim 15x6 ET48 5x10033 psi
205/55R16 89HRim 16x6.5 ET55 5x10033 psi
205/50R17 89HRim 17x6.5 ET55 5x10033 psi
215/45R17 89VRim 17x7 ET48 5x10035 psi

How to read 91S: 91 is the load index (up to 1,356 lb / 615 kg per tire) and S the speed rating (up to 112 mph / 180 km/h). ET48 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Check a new wheel against the factory 15x6 ET48 in the offset and backspacing calculator.

Impreza Anesis 2.0i (DBA-GE6) +1 variant 138 hp · H4 205/55R16 89V 4 fitments

Same tires and wheels on: 2.0i (DBA-GE7)

Generation
G3 · 2007–2011
Power
138 hp
Engine
H4, Petrol
Center bore
56.1 mm
Bolt pattern
5x100
Thread
M12 x 1.25
Tire sizeRim size and bolt patternPressure, psi
205/55R16 89VRim 16x6.5 ET55 5x10033 psi
205/50R17 89VRim 17x7 ET55 5x10033 psi
215/45R17 89VRim 17x7 ET55 5x10035 psi
225/40R18 89VRim 18x7.5 ET48 5x10035 psi

How to read 89V: 89 is the load index (up to 1,279 lb / 580 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 2010
4
Generation
G3
Other years
All years (2008–2011)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator