2022 Subaru Legacy Outback tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2022 trim.

Tires for the 2022 Subaru Legacy Outback

Sizes most trims come with first. Open your trim below for its exact size.

225/60R18 Best-rated standard on 1 trim

Check price on Amazon · 225/60R18
245/55R18 Best-rated optional on 1 trim

Check price on Amazon · 245/55R18
225/55R19 Best-rated optional on 1 trim

Check price on Amazon · 225/55R19

Also listed: 245/50R19

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2022: 1
Generation: BT
Other years: 2018
2019
2020
2021
2022
2023
2024
2025
All years (1995–2025)

1 trim sold in 2022

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Subaru Legacy Outback BT

2021–2025 1 trim

Legacy Outback 1.8T (4BA-BT5) 174 hp · 1.8L CB18 H4 225/60R18 100H 4 fitments

Generation: BT · 2021–2025
Power: 174 hp
Engine: 1.8L CB18 H4, Petrol
Center bore: 56.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.25

Check price on Amazon · 225/60R18 Wheels 18x7 ET55 · 5x114.3 · 56.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
225/60R18 100H	Rim 18x7 ET55 ~~5x114.3~~	35 psi
245/55R18 100V	Rim 18x7.5 ET55 ~~5x114.3~~	35 psi
225/55R19 98V	Rim 19x7.5 ET55 ~~5x114.3~~	35 psi
245/50R19 98V	Rim 19x8 ET48 ~~5x114.3~~	38 psi

How to read 100H: 100 is the load index (up to 1,764 lb / 800 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET55 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.