1995 Toyota Crown Majesta tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1995 trim.

Tires for the 1995 Toyota Crown Majesta

Sizes most trims come with first. Open your trim below for its exact size.

  1. 215/65R15 Best-rated standard on 9 trims
  2. 215/60R16 Best-rated standard on 1 trim · optional on 6
  3. 205/65R15 Best-rated optional on 6 trims

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1995
10
Generations
II (S150)I (S140)

10 trims sold in 1995

Open a trim for its tire and rim sizes, bolt pattern and tire pressure. Trims with the same tires and wheels share a row.

Toyota Crown Majesta II (S150)

1995–1999 4 trims
Crown Majesta 3.0i (JZS155) +2 variants 217 hp · I6 215/65R15 96H 1 fitment

Same tires and wheels on: 4.0i (UZS151), 4.0i (UZS157)

Generation
S150 · 1995–1999
Power
217 hp
Engine
I6, Petrol
Center bore
60.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/65R15 96HRim 15x6.5 ET50 5x114.3–

How to read 96H: 96 is the load index (up to 1,565 lb / 710 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Crown Majesta 4.0i (UZS155) 261 hp · V8 215/60R16 95H 1 fitment
Generation
S150 · 1995–1999
Power
261 hp
Engine
V8, Petrol
Center bore
60.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/60R16 95HRim 16x6.5 ET50 5x114.3–

How to read 95H: 95 is the load index (up to 1,521 lb / 690 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Toyota Crown Majesta I (S140)

1991–1995 6 trims
Crown Majesta 3.0i (JZS147) +5 variants 227 hp · 3.0L 2JZ-GE I6 215/65R15 96H 3 fitments

Same tires and wheels on: 3.0i (JZS149), 4.0i (UZS141), 4.0i (UZS143), 4.0i (UZS145), 4.0i (UZS147)

Generation
S140 · 1991–1995
Power
227 hp
Engine
3.0L 2JZ-GE I6, Petrol
Center bore
60.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/65R15 96HRim 15x7 ET50 5x114.335 psi
205/65R15 94TRim 15x7 ET50 5x114.335 psi
215/60R16 95HRim 16x7.5 ET50 5x114.335 psi

How to read 96H: 96 is the load index (up to 1,565 lb / 710 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET50 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1995
10
Generations
II (S150)I (S140)
Other years
All years (1991–2018)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator