2000 Mitsubishi Lancer Evolution tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2000 trim.

Tires for the 2000 Mitsubishi Lancer Evolution

Sizes most trims come with first. Open your trim below for its exact size.

205/60R15 Best-rated standard on 1 trim

Check price on Amazon · 205/60R15
205/55R16 Best-rated optional on 1 trim

Check price on Amazon · 205/55R16
215/50R16 Best-rated optional on 1 trim

Check price on Amazon · 215/50R16

Also listed: 225/45R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2000: 1
Generation: CP VI
Other years: 1996
1997
1998
1999
2000
2001
2002
2003
All years (1992–2017)

1 trim sold in 2000

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Lancer Evolution CP VI

1999–2000 1 trim

Lancer Evolution 2.0T (GF-CP9A) 276 hp · 4G63 I4 205/60R15 91H 4 fitments

Generation: CP VI · 1999–2000
Power: 276 hp
Engine: 4G63 I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/60R15 Wheels 15x6 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/60R15 91H	Rim 15x6 ET46 5x114.3	30 psi
225/45R17 91V	Rim 17x7.5 ET38 5x114.3	33 psi
205/55R16 89V	Rim 16x6.5 ET46 5x114.3	30 psi
215/50R16 89V	Rim 16x7 ET46 5x114.3	33 psi

How to read 91H: 91 is the load index (up to 1,356 lb / 615 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.