2001 Mitsubishi Lancer Evolution tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2001 trim.

Tires for the 2001 Mitsubishi Lancer Evolution

Sizes most trims come with first. Open your trim below for its exact size.

205/65R15 Best-rated standard on 1 trim

Check price on Amazon · 205/65R15
235/45R17 Best-rated standard on 1 trim

Check price on Amazon · 235/45R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2001: 2
Generation: CT VII
Other years: 1997
1998
1999
2000
2001
2002
2003
2004
All years (1992–2017)

2 trims sold in 2001

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Lancer Evolution CT VII

2001–2003 2 trims

Lancer Evolution 2.0T GSR (GH-CT9A) 276 hp · 4G63 I4 235/45R17 93V 1 fitment

Generation: CT VII · 2001–2003
Power: 276 hp
Engine: 4G63 I4, Petrol
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 235/45R17 Wheels 17x8 ET38 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
235/45R17 93V	Rim 17x8 ET38 5x114.3	33 psi

How to read 93V: 93 is the load index (up to 1,433 lb / 650 kg per tire) and V the speed rating (up to 149 mph / 240 km/h). ET38 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres. Compare offsets in the wheel offset calculator.

Lancer Evolution 2.0T RS (GH-CT9A) 276 hp · 4G63 I4 · Diesel 205/65R15 94H 1 fitment

Generation: CT VII · 2001–2003
Power: 276 hp
Engine: 4G63 I4, Diesel
Center bore: 67.1 mm
Bolt pattern: 5x114.3
Thread: M12 x 1.5

Check price on Amazon · 205/65R15 Wheels 15x6 ET46 · 5x114.3 · 67.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
205/65R15 94H	Rim 15x6 ET46 5x114.3	30 psi

How to read 94H: 94 is the load index (up to 1,477 lb / 670 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.