Goodyear Wrangler A/T SA+ vs BFGoodrich All-Terrain T/A KO2 — Compared

“I like mine so much I'm on my second set. I got 55k out of my first set (could have got another 10k but started to get a little noisy). Exact tire you have (265/70-17 C load) on a 2018 4Runner.”

“No opinion here between the Yokohamas or Falkens (both of which I would definitely put on my Outback ) but in my experience the BFG KOs are way too much tire for the Outback . I put a set of 4 on my 2013 Outback and quickly discovered that other than looking great, and being virtually bulletproof, everything else about them is a downside. Rough ride, lot of road noise, lost about 2 mpg in fuel cost, and very heavy when I did my tire rotations, which BFG says you should do every 3,000 miles to prevent excess wear. Like they say about many things, the two happiest days in my 2013 Outback ’s life were the day I put the KO2s on, and the day, after about 10,000 miles, I replaced them with “regular” tires . Great tires for a heavier vehicle, but too much for the relatively light Outback . I’ve read many Outback owner’s reviews being very happy with the Wildpeaks AND Geolanders. Sounds like that person has an agenda.”

“I changed my mind on what tire I'm getting. I bought the BFGoodrich All-Terrain KO2 LT in an E1 load rating . Discount tire put my truck specs in and even had new tire placard for the door jam. The new pressure to meet the truck weight and GVWR axle requirements has a recommended tire pressure of 41 psi in the rear and 41 psi in the front. The Goodyear wrangler Adventure with Kevlar C1 load rated LT tires required 45 psi in the rear and 45 psi in the front tires. This due to it's lower rating. Sales manager told me the Goodrich AT KO2 have better on road characteristics, better off road characteristics, and better snow performance. The BFGoodrich AT KO2 were my first choice but didn't think an E1 Load tire would work on my rims. They were the same price as the Goodyear Adventure with Kevlar so I came out good.”