2008 Aston Martin V12 Vantage tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 2008 trim.

Tires for the 2008 Aston Martin V12 Vantage

Sizes most trims come with first. Open your trim below for its exact size.

255/35R19 front + 295/30R19 rear Best-rated standard on 1 trim

Check price on Amazon · 255/35R19 front Check price on Amazon · 295/30R19 rear
235/40R19 front + 275/35R19 rear Best-rated optional on 1 trim

Check price on Amazon · 235/40R19 front Check price on Amazon · 275/35R19 rear
265/30R20 front + 305/25R20 rear Best-rated optional on 1 trim

Check price on Amazon · 265/30R20 front Check price on Amazon · 305/25R20 rear

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 2008: 1
Generation: N4
Other years: 2008
2009
2010
2011
2012
2013
2014
2015
All years (2008–2024)

1 trim sold in 2008

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Aston Martin V12 Vantage N4

2005–2017 1 trim

V12 Vantage 5.9i 569 hp · 5.9L AM28 V12 255/35R19 96Y / 295/30R19 100Y 3 fitments

Generation: N4 · 2005–2017
Power: 569 hp
Engine: 5.9L AM28 V12, Petrol
Center bore: 68.1 mm
Bolt pattern: 5x114.3
Thread: M14 x 2.0

Check price on Amazon · 255/35R19 Check price on Amazon · 295/30R19 Wheels 19x9 ET51 · 5x114.3 · 68.1 mm on Amazon

Tire size	Rim size and bolt pattern	Pressure, psi
Front255/35R19 96Y	Rim 19x9 ET51 ~~5x114.3~~	36 psi
Rear295/30R19 100Y	Rim 19x11 ET68 ~~5x114.3~~	36 psi
Front235/40R19 96W	Rim 19x8.5 ET50.3 ~~5x114.3~~	36 psi
Rear275/35R19 100W	Rim 19x9.5 ET62.5 ~~5x114.3~~	36 psi
Front265/30R20 94Y	Rim 20x9.5 ET50 ~~5x114.3~~	36 psi
Rear305/25R20 97Y	Rim 20x11.5 ET65 ~~5x114.3~~	39 psi

How to read 96Y: 96 is the load index (up to 1,565 lb / 710 kg per tire) and Y the speed rating (up to 186 mph / 300 km/h). ET51 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean

Rim size: Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD): Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore: Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure: Recommended cold inflation pressure for that axle, in psi.
Staggered: A wider tire on the rear axle than the front. Front-to-back rotation is not possible.
Thread size: Lug bolt or nut thread — needed when buying aftermarket fasteners.