1993 Mitsubishi Debonair tire and wheel sizes, bolt pattern and tire pressure

Bolt pattern 5x114.3 on every 1993 trim.

Tires for the 1993 Mitsubishi Debonair

Sizes most trims come with first. Open your trim below for its exact size.

  1. 205/65R15 Best-rated standard on 1 trim
  2. 215/65R15 Best-rated standard on 1 trim
  3. 215/60R16 Best-rated optional on 2 trims

Also listed: 215/55R17 225/50R17

TireWheelGuide may earn a commission from purchases made through these links.

Trims sold in 1993
2
Generation
S2

2 trims sold in 1993

Open a trim for its tire and rim sizes, bolt pattern and tire pressure.

Mitsubishi Debonair S2

1992–2000 2 trims
Debonair 3.0i (E-S22A) 168 hp · 6G72 V6 205/65R15 94H 3 fitments
Generation
S2 · 1992–2000
Power
168 hp
Engine
6G72 V6, Petrol
Center bore
67.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
205/65R15 94HRim 15x6 ET46 5x114.330 psi
215/60R16 95HRim 16x6 ET46 5x114.330 psi
215/55R17 93VRim 17x6.5 ET46 5x114.330 psi

How to read 94H: 94 is the load index (up to 1,477 lb / 670 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

Debonair 3.5i (E-S27A) 256 hp · 6G74 V6 215/65R15 96H 3 fitments
Generation
S2 · 1992–2000
Power
256 hp
Engine
6G74 V6, Petrol
Center bore
67.1 mm
Bolt pattern
5x114.3
Thread
M12 x 1.5
Tire sizeRim size and bolt patternPressure, psi
215/65R15 96HRim 15x6 ET46 5x114.330 psi
215/60R16 94HRim 16x6.5 ET48 5x114.330 psi
225/50R17 94VRim 17x7 ET46 5x114.333 psi

How to read 96H: 96 is the load index (up to 1,565 lb / 710 kg per tire) and H the speed rating (up to 130 mph / 210 km/h). ET46 is the wheel offset: how far the mounting face sits from the rim centre, in millimetres.

What these columns mean
Rim size
Rim diameter × width in inches, and the factory offset (ET) in millimetres, e.g. 18x7.5 ET25.
Bolt pattern (PCD)
Number of studs and the diameter of the circle they sit on. It must match exactly.
Center bore
Diameter of the hub hole. Larger aftermarket bores need hub-centric rings.
Pressure
Recommended cold inflation pressure for that axle, in psi.
Thread size
Lug bolt or nut thread — needed when buying aftermarket fasteners.
Trims sold in 1993
2
Generation
S2
Other years
All years (1992–2000)

Considering a different size?

Compare your current tire size with the one you want: diameter change, ground clearance and speedometer error.

Open the size calculator